Fabric Building Construction

We design and engineer our buildings to outperform and outlast any other fabric structure on the market. The difference is in our structure!

Calhoun Super Structures uses cutting edge technology when it comes to engineering your fabric tension building to your exact site loads, use and application. Being one of the only names in the industry to utilize 3D Finite Element Non-Linear Analysis, we can give detailed points of pressure or stresses on each specific area of your building. Knowing that each building, location and application is unique, we use only the most precise and premier technology currently available.

Our experience shows that there are some things that you just cannot compromise on, especially when it comes to customer service and the quality of your building. We are passionate about every building we sell and will not settle for anything less than superior.

 

Structural Framing

 

Building Features & Options

CC Series

 

 

 

 

Widths 32′, 42′ ,52′ &s; 62′

CC stands for compression coupler. This unique design combines a coupler and gusset which allows for a longer transfer of pressure over the connecting cords. This design allows us to achieve greater design capacity over the competitor’s flat plate gusset design that transfers the pressure to the end of the tube only.

Built to Adapt.

Our CC series is built for both commercial and Agricultural use. And our versatile options allows for you to make the building right for your application.

Options

» Engineered Wood post
» Steel Legs with different height options 2′,4′,6′,8′ & 10′
» 4′ Eave Bunker Covers
» Roof Vent Support Systems
» Individual Keder panel system ILO one piece cover
» PVC available upon request

Foundations

» Wood posts
» I-Beam
» Concrete pier
» Pre cast Blocks & walls
» Poured in place Concrete walls
» helical anchors
» Sea Containers

CC- Series Standard Features

» Hot Dipped Galvanized (HDG) Steel Frame
» Stainless Steel Cables
» HDG Hardware
» 12 oz High Density polyethylene (HDPE)
» One piece Cover (2 covers or more on building over 100′ long)

HT Series

 

 

 

 

Widths 50′, 60′, 65′, 72′ & 82′

HT – stands for High Top. Our HT series uses the same unique compression coupler design as the CC series, but utilizes larger top and bottom cords and a deeper truss depth. The HT series comes standard with our individual Keder panel system. Our individual Keder panel system is added to all buildings over the width of 60′. Click here to see why.
The HT series brings you to greater heights!

The HT design is ideal for those customers looking for extra interior height in their structure. The extra height and clear span space makes unloading large trucks easy and worry free. The HT design also makes it a “tank” in heavy snow load areas, especially in the 50′ & 60’s.

Options

» Steel Legs with different height options 2′,4′,6′,8′ & 10′
» 4′ Eave Bunker Covers
» Roof Vent Support Systems
» PVC available upon request

Foundations

» I-Beam
» Concrete pier
» Pre cast Blocks & walls
» Poured in place Concrete walls
» Helical anchors
» Sea Containers

HT – Series Standard Features

» Hot Dipped Galvanized (HDG) Steel Frame
» Stainless Steel Cables
» HDG Hardware
» 12 oz High Density polyethylene (HDPE)
» Individual Keder Panel System

VP Series - Eave or Rounded

 

 

 

 

 

Widths from 30′ to 200′

VP – stands for versatile product. The versatile design of our VP allows us to interchange the different series of truss’s to make up any size of building for any type of application, anywhere in the world.

Distinctively practical

The VP’s distinctive, traditional look with 24′ eaves finished in wood or steel, will leave you wondering if it is even a fabric building.Our rounded shoulder design finished in fabric offers a more practical and economical alternative for the VP series. The VP series is engineered to suit your needs.

Options

» Steel Legs with different height options – 8′ & 14′
» 4′ Eave Bunker Covers
» Roof Vent Support Systems
» PVC available upon request

Foundations

» I-Beam
» Concrete pier
» Pre cast Blocks & walls
» Poured in place Concrete walls
» Helical anchors
» Sea Containers

HT – Series Standard Features

» Hot Dipped Galvanized (HDG) Steel Frame
» Stainless Steel Cables
» HDG Hardware
» 12 oz High Density polyethylene (HDPE)
» Individual Keder Panel System

Calhoun Options

With a variety of options available, it is easy to customize your Calhoun Super Structure. From fabric colors to end wall, door and foundation options, creating the ideal building has never been easier! Allow one of our experience and dedicated professionals to assist you from concept to completion, to create a super structure designed and engineered specificallly for you, your location and your industry.


* Fabric colours may appear different form the colors shown above.

Ready to get Started?

NBG Fabric and Steel Building Structures for Agricultural, Industrial, Commerical, Calhoun Dealer